Olympus µ-mini DIGITAL S - Manual (Page 82)

7
Settin
g
s
82
All reset
This function lets you choose whether or not to save the current camera
settings after the power is turned off. The settings affected by [ALL
RESET] are listed as below.
The [ALL RESET] setting ([ON]/[OFF]) applies to all the modes. If [ALL
RESET] is set to [OFF] in one shooting mode, this setting applies to all the
other modes, both shooting and playback.
ON All settings are returned to the factory default settings after the power is
turned off. (factory default setting)
Ex: With [ALL RESET] to [ON], even if you set [
K ] to [SQ1], after you turn
on the camera again, it will return to [HQ] as default setting.
OFF The settings made before the power is turned off are saved.
However, each setting will return to the factory default setting with a scene
mode other than [PROGRAM AUTO].
Top menu [MODE MENU] [SETUP] [ALL RESET] [OFF] / [ON]
g“Menus” (P.12)
(Functions that return to default settings when [ALL
RESET] is set [ON].
Note
• The settings in the [SETUP] tab in the [MODE MENU] ([ALL RESET], [W],
[
8] etc.) are saved even when [ALL RESET] is set to [ON].
Function
Factory
default
setting
Ref.
page
Function
Factory
default
setting
Ref.
page
Flash mode AUTO P.34 AF MODE SPOT P.37
&, % & OFF
P.32
R (still pictures) OFF
P.52
ESP/
5
ESP P.38
u ( K mode) OFF P.42
DRIVE
o
P.47
F
0.0 P.40
ISO AUTO P.39
K
HQ P.21
DIGITAL
ZOOM OFF
P.31
WB AUTO
P.41