Olympus µ-mini DIGITAL S - Manual (Page 94)

Direct printing (PictBridge)
8
P
rin
ti
n
g
pi
ct
ur
es
94
Use the USB cable provided to connect the camera to a PictBridge-compatible
printer.
1
Turn the printer on and plug the
USB cable into the printer’s USB
port.
• For details of how to turn the printer on
and the position of the USB port, refer to
the printer’s instruction manual.
2
Plug the USB cable into the
camera’s multi-connector.
• The monitor turns on and the selection
screen for the USB connection is
displayed.
3
Select [PRINT] and press
e.
• After [ONE MOMENT] screen appears,
the camera and the printer will be
connected.
4
Select [ALL IMAGES] or [SEL. ALBUM] and press
e.
ALL IMAGES Select from all pictures in the card and print.
SEL. ALBUM Select the picture from the album entry and print.
If you selected [SEL. ALBUM], you cannot select [PRINT
ORDER] in the [PRINT MODE SELECT] screen.
Connecting the camera to a printer
Note
• If [PC] is selected, screen will not change to next screen. Remove the USB
cable and repeat the procedure from step 1 again.
• If [EXIT] is selected, the camera is not recognized by the printer and turns off.
Multi-connector
Battery compartment/
connector cover
USB
SELECT GO OK
P C
PRINT
EXIT