Olympus E-5 - Manual (Page 132)

132
EN
12
Sh
ooting tips
and main
te
nance
Error codes
Viewfinder
indications
Control
panel
indications
Monitor
indication
Possible cause Corrective action
Normal
indication
NO CARD
The card is not
inserted, or it
cannot be
recognized.
Insert a card or insert a
different card.
CARD ERROR
There is a problem
with the card.
Insert the card again. If
the problem persists,
format the card. If the card
cannot be formatted, it
cannot be used.
WRITE
PROTECT
Writing to the card
is prohibited.
The card has been set to
read-only setting with the
computer.
Reset the card with the
computer.
The SD card write protect
switch is on the LOCK
side. Return the switch to
enable writing.
CARD FULL
The card is full. No
more pictures can
be taken or no
more information
such as print
reservation can be
recorded.
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
No indication No indication
CARD FULL
There is no space
in the card and
print reservation
or new images
cannot be
recorded.
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
No indication No indication
SD Cards cannot
be read or is not
formatted.
• Select [CLEAN CARD],
press the i button and
turn off the camera.
Remove the card and
wipe dry the metallic
surface with a soft, dry
cloth.
• Select [FORMAT]
[YES], and then press
the
i button to format
the card. Formatting the
card erases all data on
the card.
No indication No indication
NO PICTURE
There are no
pictures on the
card.
The card contains no
pictures.
Record pictures and play
back.
CLEAN CARD
FORMAT
Clean the contact area of
the card with a dry cloth.
CARD SETUP
SET