Olympus E-5 - Manual (Page 98)

98
EN
7
Pl
aybac
k f
u
nct
ions
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
x
Notes
• When you perform all-frame or selected frame erase on images recorded using RAW+JPEG,
both the RAW and JPEG images are erased. When using single-frame erase, you can select
whether to erase the JPEG, RAW, or both RAW and JPEG images.
g“RAW+JPEG
ERASE” (P. 115)
• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored.
g“Protecting images” (P. 97)
Single-frame erase
1
Display the images you want to erase and press the D
button.
2
Use ac to select [YES], then press the i button.
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or
index display.
1
Display the images you want to erase and press the i button.
• The selected images will be shown with v.
• To cancel your selection, press the
i button again.
• Press p to select the images you want to erase and press the i button.
2
After you have selected the images to erase, press the D button.
3
Use ac to select [YES], then press the i button.
All-frame erase
1
MENU [W] [CARD SETUP]
2
Use ac to select [ALL ERASE], then press the i button.
3
Use ac to select [YES], then press the i button.
• All frames will be erased.
To erase immediately:
j If you have set “QUICK ERASE” (gP. 115) to [ON], pressing the D button will erase an image
immediately.
j You can set the initial position of the cursor to [YES]. g“PRIORITY SET” (P. 116)
Erasing images
 TIPS
D button