Olympus E-5 - Manual (Page 86)

86
EN
Pl
aybac
k f
u
nct
ions
7
7 Playback functions
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting.
g“REC VIEW” (P. 99)
1
Press the q button (Single-frame playback).
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn on
the camera again.
2
Use bd or k to select images you want to view.
You can also turn j to switch to U for close-up
playback.
• You can switch the operations of both dials. gP. 104
Single-frame/Close-up playback
q button
INFO button
p
< button
j
[4032x3024,1/8] [4032x3024,1/8]
2010.09.01 2010.09.01 21:56 21:56
100-0015 100-0015
15 15
L N N
15 15 15
JPEG
R
m
JPEG EDIT
P
SET BACK
Press bd to view frame-
by-frame close-ups.
When [g FACE DETECT]
is set to [ON], press
ac
to move to another face in
close-up position.
Press p to move the display
of the close-up position.
When [g FACE DETECT]
(
gP. 38) is set to [ON], a
frame is displayed around a
detected face. Press
i to
move the frame to another
face.
Press p to change the
close-up position.
(Single-frame
playback) (Close-up frame-by-frame playback)
d : Displays the next frame
b : Displays the previous frame
(Close-up position playback)
(Close-up playback)
• To exit the playback mode, press the
q button again.
• Pressing the shutter button halfway
resumes the shooting mode.
Press the < button
• Plays back the image at a 10×
magnified close-up position.
• The menu for the displayed
image type is displayed.
ibutton
INFO
INFO/Fn
INFO/Fn
U
G
Fn