Olympus µ TOUGH-8000 - Manual (Page 14)

14 EN
Setting the date and time
The date and time set here are saved to image
file names, date prints, and other data.
1
Press the n button to turn on
the camera.
The date and time setting screen is displayed
when the date and time are not set.
X
Y M
Y M D
D TIME
---- -- -- -- --
MENU CANCEL
Date and time setting screen
2
Use EF to select the year for [Y].
2009 -- -- -- --
X
Y M
Y M D
D TIME
MENU CANCEL
3
Press H to save the setting for [Y].
2009 -- -- -- --
X
Y M
Y M D
D TIME
MENU CANCEL
●
4
As in steps 2 and 3, use EFGH
and the  button to set
[M] (month), [D] (day), and
[TIME] (hours and minutes), and
[Y/M/D] (date order).
For precise time setting, press the  button
as the time signal strikes 00 seconds.
To change the date and time, adjust the
setting from the menu. [X] (Date/time)
(p. 46)
To check the date and time
Press the g button while the camera is
turned off. The current time is displayed for
approx. 3 seconds.
Changing the display language
The language for the menu and error messages
displayed on the monitor is selectable.
1
Press the  button, and press
EFGH to select [E] (SETUP).
MENU EXIT SET OK
SETUP
2
Press the  button.
1
2
3
4 BACKUP
NORMAL
SETUP
ENGLISH
PW ON SETUP
MENU COLOR
MEMORY FORMAT
MENU EXIT SET OK