Olympus µ TOUGH-8000 - Manual (Page 19)

1 EN
To take underwater photos
Select [  UNDERWATER SNAPSHOT],
[k UNDERWATER WIDE1],
[l UNDERWATER WIDE2] *1 ,
[H UNDERWATER MACRO].
When the mode dial is set to  during
underwater shooting (i.e., while the
underwater sensor is responding), the above
mentioned 4 modes appear before other
modes.
*1 When set to [l UNDERWATER WIDE2],
the focus distance is automatically fixed to
approx. 5.0 m (16.4 ft.).
Be sure to use an underwater case when
using the camera at depths exceeding 10 m
(32.8 ft.).
When [MANOMETER] (p. 48) is set to
[ON], the altitude/water depth (atmospheric/
hydraulic pressure) appears on the shooting
standby mode screen as a rough guide.
“Shooting mode display” (p. 8)
“Important information about water and
shock resistant features” (p. 68)
To lock the focus distance for
underwater shoots (AF lock)
When [  UNDERWATER SNAPSHOT],
[k UNDERWATER WIDE1], or,
[H UNDERWATER MACRO] is selected,
press F.
AFL
12 M
4
IN
N
ORM
^ mark
To cancel, press F again to clear the
^ mark.
This section describes the available shooting
modes. Depending on the mode, some settings
can be changed. For details on the functions
that can be adjusted, see “Menus for Shooting
Functions” on page 29.
Using the best mode for the
shooting scene ( mode)
1
Set the mode dial to
.
PORTRAIT
SET OK MENU EXIT
An explanation of the selected mode is displayed
while the E button is pressed and held.
2
Use EF to select the best
shooting mode for the scene, and
press the
o button.
12 M
4
IN
N
ORM
Icon indicating
the scene mode
that is set
To change to another scene mode, use the
menu. [O SCENE MODE] (p. 33)
●
Using Shooting Modes