Olympus µ TOUGH-8000 - Manual (Page 25)

 EN
Changing the shooting
information display
The display of the screen information can be
changed to best match the situation, such as
for the need of clear view of the screen or for
making a precise composition by using the grid
display.
1
Press the
g button.
The displayed shooting information changes in
the order shown below each time the button is
pressed. “Shooting mode display” (p. 8)
12 M
+2.0
P
4
IN
ISO
1600
N ORM
12 M
+2.0
P
4
IN
ISO
1600
N ORM
12 M
+2.0
P
4
IN
ISO
1600
N ORM
Normal
No information
Histogram
Grid
Reading a histogram
If the peak fills too much of the frame,
the image will appear mostly white.
If the peak fills too
much of the frame,
the image will
appear mostly black.
The green section shows
the luminance distribution in the
center area of the monitor.
●
Using the FUNC menu
The FUNC menu provides the following menu
functions that can be quickly called and set.
[WB] (p. 30) • [ESP/n] (p. 32) •
[ISO] (p. 30) • [A IMAGE QUALITY] (p. 29) •
[DRIVE] (p. 31) •
1
Press the
o button.
n
12 M ESP
ISO
AUTO
WB
AUTO
ESP
ESP N
ORM
P
2
Use EF to select the menu
function and GH to select the
setting option, and then press the
o button to set.