Olympus 720 SW - Manual (Page 32)

32
Menu
o
perat
ion
s
2
You can select a language for on-screen display. Available languages vary
depending on the area where you purchased this camera.
You can add other languages to your camera with the provided OLYMPUS
Master software.
You can select the volume level and the picture displayed when the camera is
turned on. If [SCREEN] is set to [OFF], [VOLUME] cannot be set.
• Even if [SCN] is set to [MUSEUM], the camera emits beep by turning off and
then on the camera when [LOW] or [HIGH] is selected for [VOLUME] of [PW
ON SETUP].
If you do not want to emit beep, set [VOLUME] to [OFF] in advance.
Still pictures in the internal memory or the card can be registered to screen [2] for
[PW ON SETUP].
If a picture is already registered, the [IMAGE EXISTING] screen is displayed
asking if you want to cancel the currently registered picture and register a new one.
W
......................................................................... Selecting a display language
K q
........................... Using Shooting button / Playback button to turn on the camera
YES • Pressing the
K/h/ s button turns on the camera and starts the
camera in the shooting mode.
• Pressing the
q button turns on the camera and starts the camera in the
playback mode.
NO The power is not turned on. To turn on the camera, press the o
button.
PW ON SETUP ...................................... Setting the startup screen and volume
SCREEN OFF (No picture is displayed.) / 1 / 2 (The picture registered with
[SCREEN SETUP] is displayed.)
VOLUME OFF (No sound) / LOW / HIGH
SCREEN SETUP ............................Registering a picture as the startup screen
COLOR ...................................................... Setting the color of the menu screens
NORMAL /BLUE /BLACK / PINK
BEEP ............................. Adjust the volume of beep when the button is pressed
OFF (No sound) / LOW / HIGH
8
....................................................Adjust the volume of camera warning sound
OFF (No sound) / LOW / HIGH