Olympus 720 SW - Manual (Page 36)

36
Menu
o
perat
ion
s
2
Operating, shutting off and checking the alarm
• Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
• Shutting off the alarm:
While the alarm is sounding, press any button to shut off the alarm and turn off
the camera. Note that pressing the o button,
K/h/ s button or q
button will turn the camera on. (Pressing the
K/h/ s button and q
button will turn the camera on only when [
K q] is set to [YES].)
When [SNOOZE] is set to [ON] at this time, the setting will be canceled. When
[SNOOZE] is [OFF], the alarm stops automatically and the camera turns off
after 1 minute of no operation.
The factory default settings differ according to the region where the camera
is sold.
To play back camera images on a TV, set the video output according to your TV’s
video signal type.
• TV video signal types by country/region Check the video signal type before
connecting the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL:
European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
VIDEO OUT ...........................................................Playing back pictures on a TV
NTSC / PAL
Connect to the TV’s video
input (yellow) and audio
input (white) terminals.
AV cable (provided)
Multi-connector
Connector cover
Settings on the camera
Press the
q button to turn on the
camera.
• The last picture taken is displayed
on the TV. Use the arrow pad (
43)
to select the picture you want to
display.
Settings on the TV
Turn the TV on, and set it to video
input mode.
• For details of switching to video
input, refer to your TV’s instruction
manual.