Olympus 720 SW - Manual (Page 34)

34
Menu
o
perat
ion
s
2
The pixel mapping feature allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait at least one minute
after taking or viewing pictures to allow the pixel mapping function to perform
properly. If you turn the camera off during pixel mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press
o.
The date and time is saved with each image, and is used in the file name.
• The first two digits of the year are fixed.
• The time is displayed in the 24-hour format.
• For a more accurate setting, press
o when the time signal hits 00 seconds.
PIXEL MAPPING ..............................Adjusting the image processing function
s
......................................................................Adjusting the monitor brightness
X
....................................................................................Setting the date and time
OK SET MENU BACK
s
Ŝ Ŋ ŏ Ş
1: Brightens the monitor. 2: Darkens the monitor.
Press
o after setting is complete.
OK SET MOVE
X
Ŝ Ŋ ŏ Ş
x x ijııķġįġıIJġįġıIJ ijııķġįġıIJġįġıIJ
Y ȁ M ȁ D
ııġĻġıı ııġĻġıı
12 : Sets the date and time.
43 : Moves to the previous or next setting.
12 : Select the date format (Y-M-D, M-D-Y, D-M-Y).