Getting to know your camera better, Shooting tips and information, Troubleshooting – Olympus µ 1000 User Manual

Page 50: P. 50, Ab c d

Advertising
background image

50

EN

Get

ti

ng

to

kn

ow yo

ur c

amera

bet

te

r

Getting to know your camera better

Getting to know your camera better

The battery is not fully charged

• Charge the battery with the charger.

The battery is temporarily unable to function because of the cold

• Battery performance declines in low temperatures, and the charge may not be sufficient

to turn on the camera. Remove the battery and warm it by putting it in your pocket for a
while.

The camera is in sleep mode

• To save battery power, the camera automatically goes into sleep mode and the monitor

turns off if there is no operation when the camera is turned on (when the lens is extended
and the monitor is on). No picture is taken even if the shutter button is fully pressed in
this mode. Operate the zoom button or other buttons to restore the camera from sleep
mode before taking a picture. If the camera is left for 15 minutes, it automatically turns
off (the lens retracts and the monitor turns off). Press o to turn the camera on.

The mode dial is set to

q

• This is the playback mode for displaying pictures on the monitor. Set the mode dial to a

shooting mode.

The mode dial is in the position of

g

• No pictures can be taken when the shooting guide is being displayed.

Take pictures after setting target terms by following the shooting guide or set it to the
setting other than

g in shooting mode.

The flash is charging

• Wait until the

# (flash charge) mark stops blinking before taking the picture.

The camera's internal temperature increases.

• With prolonged camera use, the internal temperature may increase, resulting in

automatic shutdown. If this occurs, remove the battery from the camera and wait until
the camera has sufficiently cooled. The camera's external temperature may also
increase during use, however this is normal and does not indicate malfunction.

The memory gauge is full

• No pictures can be taken when the memory gauge is full. Wait until there is space in the

memory gauge.

Shooting tips and information

Troubleshooting

The camera does not turn on even when a battery is loaded

No picture is taken when the shutter button is pressed

a

b

c

d

Before taking

any pictures

(Off)

Maximum

reached

(All lit)

After taking

one picture

(Lit)

After taking

several pictures

(Lit)

Shoot

Shoot

Shoot

Wait

Advertising