Olympus µ 1040 - Manual (Page 14)

1 EN
3
Press the shutter button halfway
down to focus on the subject.
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
The camera was unable to focus if the AF target
mark flashes red. Try focusing again.
“Focusing” (p. 46)
4
To take the picture, gently press
the shutter button all the way down
while being careful not to shake the
camera.
To view images during shooting
Pressing the q button enables playback of
images. To return to shooting, either press
the K button or press the shutter button
halfway down.
To shoot movies
“Shooting movies ( A mode)” (p. 17)
When shooting is finished
Slide the lens barrier up to turn off the
camera.
All shooting settings except P mode return
to default settings when the camera is
turned off.
●
●
Shooting with optimum
aperture value and shutter
speed (P mode)
In this mode, automatic camera shooting can
be used while also allowing changes to a wide
range of other shooting menu functions, such as
exposure compensation, white balance, and so
on when needed.
1
Slide the lens barrier down to turn
on the camera.
2
Hold the camera, and compose the
shot.
Shooting, Playback, and Erasing
1/400 F3.5
P
Horizontal grip
Vertical grip
Monitor
P
1/400 F3.5
Image review screen
Press fully
1/400 F3.5
P
AF target mark
Press halfway
Shutter speed Aperture
value
10 M
4
IN
N
ORM
P
Monitor (standby mode screen)
Number of storable still
pictures (p. 50)