Olympus µ 1040 - Manual (Page 39)

 EN
6
Use FD to select an image.
7
To make a [SINGLEPRINT]
reservation for the current image,
press the
< button.
To make detailed settings for the
current image, press
E .
To make detailed settings
1 Use CEFD to make the settings,
and press the x button.
PRINT INFO
<x
DATE
FILE NAME
1
WITHOUT
WITHOUT
MENU EXIT SET OK
Submenu 5 Submenu 6 Application
< × 0 to 10
This selects the number
of prints.
DATE
WITH/
WITHOUT
Selecting [WITH] prints
the images with the date.
Selecting [WITHOUT]
prints the images without
the date.
FILE NAME WITH/
WITHOUT
Selecting [WITH] prints
the file name on the
image.
Selecting [WITHOUT]
does not print any file
name on the image.
8
If necessary, repeat Steps 6 to 7
to select the image to be printed,
make the detailed settings, and set
[SINGLEPRINT].
9
Press the x button.
PRINT
SET OK MENU BACK
PRINT
CANCEL
10
Use CE to select [PRINT], and
press the x button.
Printing starts.
Selecting [OPTION SET] in [ALL PRINT] mode
displays the [PRINT INFO] screen.
When printing is finished, the [PRINT MODE
SELECT] screen is displayed.
ALL PRINT
PRINT MODE SELECT
SET OK
ALL INDEX
PRINT ORDER
MULTI PRINT
PRINT
EXIT MENU
To cancel printing
1 Press the x button while [TRANSFERRING]
is displayed.
2 Use CE to select [CANCEL], and then
press the x button again.
11
Press the
 button.
12
When the message [REMOVE USB
CABLE] is displayed, disconnect
the USB cable from the camera and
printer.
●
●
●
PRINT
SET OK
CONTINUE
CANCEL
CANCEL OK
TRANSFERRING