Olympus µ 1040 - Manual (Page 26)

 EN
Reducing blur due to camera shake
during movie shooting
[DIS MOVIE MODE]
K CAMERA MENU  DIS MOVIE MODE
K : A
Submenu 2 Application
OFF
Shoots without using the image
stabilizing function. (Use when
shooting with the camera fixed to a
tripod or similar.)
ON
Shoots using the image stabilizing
function.
Image stabilization may not prevent motion
blur caused by movement of the subject or
by extreme movement of the camera.
When set to [ON], shooting is slightly
zoomed in.
Selecting a scene mode according to
the shooting situation [
/ s]
/ s
K : s
In s mode, the optimum shooting
settings are pre-programmed for specific
shooting scenes. For this reason, settings
may not be changed in some modes.
Submenu 1 Application
B PORTRAIT/F LANDSCAPE/
D LANDSCAPE+PORTRAIT/
M NIGHT+PORTRAIT/
C SPORT/R SELF PORTRAIT/
V CUISINE/N SMILE SHOT/
A MOVIE
The camera takes
a picture in the
mode for the
shooting scene.
To take pictures in the selected scene
mode
“Using the best mode for the shooting
scene (
s mode)” (p. 16)
To release the shutter automatically
when the camera detects a smiling
face ([N SMILE SHOT] mode)
1 Select [N SMILE SHOT] and point the
camera toward the subject.
The self-timer lamp turns on. When the
camera detects a smiling face, it automatically
takes 3 frames sequentially.
Pictures can also be taken manually by
pressing the shutter button.
Depending on your subject, a smiling face
may not be detected.
Making settings by following the
shooting guide [
R]
R
K : P G
This provides an on-screen guide for the
user to automatically make a desired camera
setting such as adjusting the setting for a
subject or selecting the shooting setting to
obtain a desired effect.
1
Follow the guide by using CEFD to
proceed.
Pressing the x button completes the setting
and makes the camera ready for shooting.
1
2
3
4
5
OK
SET
SHOOTING GUIDE
Shoot w/ effects preview.
Brightening subject.
Shooting into backlight.
Set particular lighting.
Blurring background.
10 M
17
IN
GUIDE
N
ORM
# #
MODE CHANGED
To exit the shooting guide, press the 
button to select [EXIT], and press the x
button. Functions set using the shooting
guide will revert to their previous settings.
●
●