Olympus UFL-2 - Manual (Page 26)

EN 26
EN
Select the flash control mode according to the subject and the shooting
conditions. Press the MODE button repeatedly to change the flash control
mode.
Control panel display Explanation
The flash light intensity is controlled automatically according to
the camera’s setup. The flash will be adjusted based on the
brightness taken through the camera’s lens.
The flash light intensity is controlled automatically according to
the camera’s setup. The flash will be adjusted based on the
brightness captured by auto light-receiving window on the
electronic flash.
The flash is emitted according to the guide number (GN) set
using the dial. The optimum shooting distance (land shooting)
according to the camera’s setup will be displayed.
s
Super FP flash. This mode allows you to use flash photography
even at shutter speeds faster than the flash synchronization
speed of the camera. In AUTO mode the flash light intensity is
controlled automatically. In MANUAL mode the flash is emitted
according to the guide number selected.
CAUTION
• Certain modes may be unavailable depending on the shooting mode set
on the camera and the functions of the camera in use.
• It is not possible to select an unavailable mode.
r2090_e_00.book Page 26 Thursday, May 1, 2008 6:29 PM