Brother HL-2060 - Manual (Page 141)

USER’S GUIDE
4–66
After printing is finished, set the printer off-line and press the FORM
FEED switch once, so that the printer prints reprints the last job.
The display shows the following message during reprinting:
REPRINT 1 JOB
If the printer does not have enough memory to reprint the entire job, it
reprints the last page only, and the display shows the following message
during reprinting:
REPRINT 1 PAGE
When you press the FORM FEED switch one or more times during
reprinting, you can set the number of pages to reprint. The printer reprints
the same job the number of times you press the switch.
✒ Note
•
The reprint data remains in the printer’s memory until the printer is
reset or the emulation, or some settings are changed. After you have
reprinted confidential data, be sure to reset the printer to clear it from
the printer’s memory.
•
If the printer cannot distinguish the job unit, it prints the last page only.
You can reprint the job by using the supplied attached printer driver.
•
You cannot use the reprint function in the BR-Script 2 emulation
mode.