Brother HL-2060 - Manual (Page 84)

CHAPTER 4 CONTROL PANEL
4–9
MODE Switch
Pressing the MODE switch allows you to enter modes where you change
settings. The mode menus and settings vary according to the current
emulation mode and options. For details, refer to the pages indicated in
parentheses.
HP LaserJet, EPSON
FX-850, and IBM Proprinter XL Modes BR-Script Mode HP-GL Mode
INTERFACE MODE INTERFACE MODE INTERFACE MODE
Set interface, parameters. (4-19) Set interface, parameters. (4-19) Set interface, parameters. (4-19)
FORMAT MODE FORMAT MODE FORMAT MODE
Set orientation, paper size, margins, &
others. (4-22) Set horizontal & vertical offsets. (4-22) Set orientation, paper size, margins, pen
setting & others. (4-22)
RESOLUTION MODE RESOLUTION MODE RESOLUTION MODE
Set resolution & HRC. (4-31) Set resolution & HRC. (4-31) Set resolution & HRC. (4-31)
PAGE PROTECTION PAGE PROTECTION
Protect data on a page. (4-36) Not available. Protect data on a page. (4-36)
CARD OPERATION CARD OPERATION CARD OPERATION
Set a flash memory card or a HDD card in
HP mode. (4-37) Set a flash memory card or a HDD card.
(4-37) Set a flash memory card or a HDD card.
(4-37)
ADVANCED MODE ADVANCED MODE ADVANCED MODE
Set network mode, print density, & others.
(4-46) Set network mode, print density, & others.
(4-46) Set network mode, print density, & others.
(4-46)
PAGE COUNTER PAGE COUNTER PAGE COUNTER
Show # of printed pages. (4-52) Show # of printed pages. (4-52) Show # of printed pages. (4-52)
exit MODE exit MODE exit MODE
Exit to off-line ready state. (4-52) Exit to off-line ready state. (4-52) Exit to off-line ready state. (4-52)