Brother HL-2060 - Manual (Page 159)

USER’S GUIDE
4–84
List of Factory Settings
The following table shows the factory settings initially set before shipment.
✒ Note
• The settings are subject to the emulation mode. Effective modes are
indicated in parentheses in the following table.
•
The following settings cannot be restored to the factory settings with
the RESET switch in the “FACTORY SETTINGS” mode:
INTERFACE MODE, HRC SETTING, PAGE PROTECTION,
SCALABLE FONT, LOCK PANEL, and PAGE COUNTER, and local
language for display messages.
• The COPY setting is always restored to the factory setting when the
printer is turned off and on again.
•
The user settings are overwritten after resetting to setting 1 or 2.
Switch Item Sub-Item Factory Setting
MODE
INTERFACE MODE – I/F=AUTO
For AUTO mode
TIME OUT TIME OUT= 5s
For bi-directional PARALLEL interface
HIGH SPEED HIGH SPEED=ON
BI-DIR BI-DIR=ON
For RS-232C serial interface
Baud Rate BaudRate= 9600
Code Type CodeType=8 bits
Parity Parity =NONE
Stop Bit Stop Bit= 1 bits
Xon/Xoff Xon/Xoff=ON
DTR (ER) DTR (ER)=ON
Robust Xon Robust Xon=OFF
FORMAT MODE ORIENTATION (Except for BR-
Script 2)
ORI=PORTRAIT
AUTO MODE (HP LaserJet)
AUTO LF OFF
AUTO CR OFF
AUTO WRAP OFF
AUTO SKIP ON
AUTO MODE (EPSON)
AUTO LF OFF