Pioneer AVIC-F550BT - Manual (Page 116)

Black plate (116,1)
Problems with the AV screen
Symptom Cause Action (Reference)
CD playback is not possible. The disc is inserted upside down. Insert the disc with the label upward.
The disc is dirty. Clean the disc.
The disc is cracked or otherwise da-
maged. Insert a normal, round disc.
The files on the disc are in an irregu-
lar file format. Check the file format.
The disc format cannot be played
back. Replace the disc.
The loaded disc is a type this system
cannot play. Check what type of disc it is. (Page 122)
The screen is covered by a cau-
tion message and the video can-
not be shown. The handbrake lead is not con-
nected or applied. Connect the handbrake lead correctly, and
apply the handbrake.
The handbrake interlock is acti-
vated. Park your vehicle in a safe place and apply
the handbrake.
No video output from connected
equipment.
No video output from connected
iPod. The connection of the USB interface
cable for iPod is incorrect. Connect both the USB plug and the RCA
cable side. (If only one of these connection
has been made, the iPod will not work prop-
erly.) (Page 26)
The audio or video skips. The navigation system is not firmly
secured. Secure the navigation system firmly.
No sounds are produced.
The volume level will not rise. Cables are not connected correctly. Connect the cables correctly.
The system is paused or performing,
fast reverse or forward during the
disc playback. For the media other than music CD (CD-DA),
there is no sound on fast reverse or forward.
The picture stops (pauses) and
the navigation system cannot be
operated. The reading of data is impossible
during disc playback. Stop playback once, then restart.
The picture is stretched, with an
incorrect aspect ratio. The aspect setting is incorrect for
the display. Select the appropriate setting for that image.
iPod cannot be operated. The iPod is frozen.
! Reconnect the iPod with the USB interface
cable for iPod.
! Update the iPod software version.
An error has occurred. ! Reconnect the iPod with the USB interface
cable for iPod.
! Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
off (ACC OFF). Then restart the engine, and
turn the power to the navigation system back
on.
! Update the iPod software version.
<127075004783>116
Engb
116
Appendix
Appendix