Pioneer AVIC-F550BT - Manual (Page 94)

Black plate (94,1)
You can display the video image output by the
device connected to the navigation system.
For details of the connection method, refer to
the Installation Manual.
CAUTION
For safety reasons, video images cannot be
viewed while your vehicle is in motion. To view
video images, you must stop in a safe place and
apply the handbrake.
Reading the screen
Audio
3 1 2
Video
3
1 Number of the Bluetooth connection de-
vice
2 Reception status of the mobile phone
3 Current time
Using AUX
You can display the video image output by the
device connected to AUX.
1 Set the video input.
= For details, refer to Setting the video input
signal on page 106.
2 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 75.
3 Tap [AUX] on the AV source list to dis-
play the “AUX” screen.
“AUX” screen appears and video image is dis-
played on the screen.
4 Touch the screen to display the touch
panel keys.
Using the touch panel keys
1
4 3
2
1 Displays the AV source list
= For details, refer to Selecting a source
on page 75.
2 Sets the time
= For details, refer to Setting the time on
page 112.
3 Switches between Video and Audio
Tapping the key switches between the Audio
playback and Video playback.
4 Changes the screen size of video
p This function only works for the video
screen.
Tapping the key displays the screen size set-
ting screen which lets you switch the setting
to the following:
! Full (full)
A 4:3 picture is enlarged in the horizon-
tal direction only, enabling you to enjoy
a 4:3 TV picture (normal picture) without
any omissions.
! Normal (normal)
A 4:3 picture is displayed normally, giv-
ing you no sense of disparity since its
proportions are the same as those of the
normal picture.
<127075004783>94
Engb
94
Chapter
25 Using AV input