Pioneer AVIC600T-II - Manual (Page 20)

19
Chapter 1
Basic Operation
How to Use the Map
Most of the information provided by your Naviga-
tion System can be seen on the map. You need to
get to know how the information appears on the
map.
Switching the Current Position
Screen Display Mode
This section describes how to display the current
position screen and change the map display
mode.
There are four types of map display.
• Map Mode
• Driver’s View
• Mixed Mode (during route guidance only)
• St.List Mode (during route guidance only)
1
Press the NAVI button to display a map of
the area around your current position.
2
Press the NAVI button again.
3
Touch the mode name or press the NAVI
button to select the mode you want to dis-
play.
❒
If the mode is selected by pressing the
NAVI button, the screen soon automati-
cally switches to the selected map display
mode.
How to view the map of the cur-
rent location
Caution
In Driver’s View, the speedometer is indi-
cated on the screen, but this will differ from
the actual speed of your vehicle. Use the
speedometer of your vehicle for confirming
the speed.
Map Mode
Displays standard map.
Driver’s View
The map from the driver’s viewpoint is shown.
(1) (2)
(11)
(17)
(3)
(4)
(8) (5) (13) (12)
(7) (6)
(9)
(10)
(1)
(4)
(2)
(16)
(8) (5) (17) (10) (9) (12) (13)
(7)
(14)
(3)
(11) (6)
CRB1881A_ENGLISH.book Page 19 Thursday, April 24, 2003 11:54 AM