Pioneer PDP-506XDE - Manual (Page 63)

63
En
Enjoying through External Equipment 13
En
gl
is
h
Watching a DVD image
Connecting a DVD player
Use the INPUT 2 terminal when connecting to a DVD player
and other audiovisual equipment.
Displaying a DVD image
To watch a DVD image, press INPUT 2 on the remote control
unit or press INPUT on the Media Receiver to select INPUT2.
NOTE
• If DVD images do not come in clearly, you may need to
change the input signal type setting using the menu. See
page 55.
• Refer to your DVD player operation manual for the signal
type.
Using the SCART output function
This function allows you to record DTV progremmes with a
connected VCR or other recording equipment while enjoying
watching the Plasma Display as usual. With this function, you
can also easily enjoy timeshift playback when a DVD recorder
(DVR) is in connection.
The following diagram assumes that you connect a Pioneer
DVR-920H/DVR-930H to the Media Receiver so that you can
enjoy timeshift playback with the recorder.
In addition to the above connections, you need to perform the
following:
• See “Switching the SCART output” (page 64) and select
“Fixed on DTV” for “SCART Output” in the Setup menu.
• On the DVD recorder (DVR), select the video/audio input
source matching the external input terminal to which the
Media Receiver has been connected. For this method, see
the operation manual that came with the recorder.
• Select the input source on the Media Receiver depending on
the terminal to which the output of the DVD recorder (DVR)
has been connected; for the above connection example,
select INPUT 2.
When you complete the above connections and setups, you
can then enjoy timeshift playback with the DVD recorder
(DVR). You can also select the 2-screen or picture-in-picture
mode to watch images coming from the DTV input source and
an external input source (INPUT 2 for the above connection
example) to which the output of the recorder has been
connected.
NOTE
• Some DVD recorders (DVRs) may not allow timeshift
playback. Check the operation manual that came with your
recorder.
• For details about connection and setting procedures, see the
operation manual that came with your DVD recorder (DVR).
INPUT 1
INPUT 1
CONTROL
SERVICE ONLY I N O U T
ANT i /o link.A
SELECT
INPUT 2 3
INPUT 3 HDMI HDMI
SYSTEM CABLE
ANT(DIGITAL) IN OUT OPTICAL DIGITAL OUT COMMON INTERFACE
INPUT 2
COMPONENT VIDEO Y AUDIO OUTPUT
INPUT 4
R-AUDIO-L SUB WOOFER P B P R
BLACK WHITE
Media Receiver (rear view)
SCART cable
(commercially available)
Component cable
(commercially
available)
When using
component cable,
select “COMPONENT”
for “Input Select” in the
menu. See page 55.
At the same time
connect a SCART
cable to input audio
signals.
DVD player
INPUT 1
INPUT 1
CONTROL SERVICE ONLY I N O U T
ANT i /o link.A
SELECT
INPUT 2 3
INPUT 3 HDMI HDMI
SYSTEM CABLE
ANT(DIGITAL)
IN OUT OPTICAL DIGITAL OUT COMMON INTERFACE
INPUT 2
COMPONENT VIDEO
Y
AUDIO OUTPUT
INPUT 4
R-AUDIO-L SUB WOOFER P B P R
BLACK WHITE
COMPONENT VIDEO OUT
AC IN
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
CONTROL
IN
R L AUDIO VIDEO S-VIDEO
Y
P B
P R
OUT PUT
HDMI OUT
IN PUT 3
AV 1 (RGB) - TV AV 2 (INPUT 1/DECODER)
Media Receiver (rear view)
SCART cable
(commercially
available)
DVR-920H/930H
SCART cable
(commercially available)
PDP506XDE.book Page 63 Friday, June 17, 2005 3:08 PM