Pioneer XW-SMA3-W - Manual (Page 12)

Connections 02
12
En
Chapter 2:
Connections
Caution
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.
Connecting iPod/iPhone/iPad
It is possible to listen to audio when iPod/iPhone/iPad is
connected to this unit. Open the terminal cover (XW-SMA3
only) (page 16).
Switch the unit into standby then connect your iPod/iPhone/
iPad to the USB terminal on the rear panel of this unit.
When the unit’s power is turned ON, the iPod/iPhone/iPad
connected to the unit will be charged.
When this unit is running by the built-in battery, iPod/iPhone/
iPad is not charged (XW-SMA3 only).
Connecting to the network through the
wired or wireless LAN
By connecting this unit to the network via the wired or
wireless LAN, you can play back audio files stored on devices
on the network.
1
Open the terminal cover (XW-SMA3 only).
Connect the LAN connector on this unit to the LAN connector
on your router (with or without the built-in DHCP server
function) with a straight LAN cable (CAT 5 or higher). Also
wireless connection to the network is possible.
Turn on the DHCP server function of your router.
If your router does not have a built-in DHCP server function,
you have to set up the network manually.
See Connect to network on page 18.
Connecting using LAN cable
Connecting using wireless LAN
Note
1 • Photo or video files cannot be played back.
• With Windows Media Player 11 or 12, you can even play back copyrighted audio files on this unit.
iPod/iPhone/iPad LAN(10/100)
iPod/iPhone/iPad
iPod/iPhone/iPad LAN(10/100)
WAN 3 2 1
LAN
PC2 PC1
LAN cable
(commercially
available)
Router
WAN 3 2 1
LAN
on input network
input volume standby/on
Router