Connect to network 04 – Pioneer XW-SMA3-W User Manual
Page 20
Connect to network
04
20
En
C: Connection settings from a Web browser
using a computer, iPhone, tablet PC or other
device supporting wireless LAN
1
Confirm that the AC adapter and LAN cable
are not connected to the unit.
2
Connect the AC adapter, and press
standby/on button.
The
on indicator will flash blue. Wait for about 30 to 40
seconds.
3
When the on indicator stops flashing, press
and hold volume “-” button on the front panel,
and then press and hold network setup/wireless
direct button on the rear panel for 3 seconds.
The unit will begin rebooting (the
on indicator will flash blue);
wait for about 30 to 40 seconds.
4
When the network indicator lights red,
connect to the network called “Pioneer
Setup:xxxxxx” from Wi-Fi network setting on
the computer, iPhone, tablet PC or other device.
The “xxxxxx” is the device's unique identifier number.
Not all characters may be displayed, depending on the device
used.
5
When the connection is established, boot
your Web browser and access the URL noted
below to make settings for this unit.
The Web Control menu will appear.
For Safari
Press Bookmark icon (
) at the upper left of the screen.
Click Bonjour list (a), and then select this unit's name
(“Friendly Name”) (b) in Bookmark.
AUX IN
DC IN
iPod/iPhone/iPad
LAN(10/100)
AUX IN
DC IN
input
volume
standby/on
6
input
volume
standby/on
6
network setup
wireless direct
AUX IN
DC IN
• Consult the appropriate Operating Instructions for
information regarding operation of the computer, iPhone,
tablet PC or other device used.
• Since this kind of connection is not encoded, a minor
security risk may be involved.
Wi-Fi Network
Choose a Network...
iPod
Network
ON
Wi-Fi
Pioneer Setup:xxxxxx
SMA
http://192.168.1.1
a
b
SMA