Pioneer VSX-923-S - Manual (Page 31)

31
03
Connecting your equipment
Connecting optional Bluetooth ADAPTER
When the Bluetooth ® ADAPTER (AS-BT100 or AS-BT200) is connected to this receiver, a product equipped with
Bluetooth wireless technology (portable cell phone, digital music player, etc.) can be used to listen to music
wirelessly.
! The Bluetooth wireless technology enabled device must support A2DP profiles.
! Pioneer does not guarantee proper connection and operation of this unit with all Bluetooth wireless technology
enabled devices.
! The Air Jam function cannot be used with the AS-BT100.
( OUTPUT 5 V 0.1 A MAX)
ADAPTER PORT
( OUTPUT 5 V
0.1 A MAX)
ADAPTER PORT
Bluetooth® ADAPTER
Important
! Do not move the receiver with the Bluetooth ADAPTER connected. Doing so could cause damage or faulty
contact.
% Switch the receiver into standby and connect Bluetooth ADAPTER to the ADAPTER PORT.
! For instructions on playing the Bluetooth wireless technology device, see Pairing the Bluetooth ADAPTER and
Bluetooth wireless technology device on page 46 .
Connecting an iPod
This receiver has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod
using the controls of this receiver.
MASTER VOLUME
STANDBY/ON
INPUT SELECTOR
iPod iPhone iPad DIRECT CONTROL ECO ADVANCED SURROUND STANDARD SURROUND AUTO SURR/ALC/ STREAM DIRECT
PHONES
SPEAKERS CONTROL – MULTI-ZONE – ON / OFF BAND TUNER EDIT TUNE PRESET ENTER
iPod iPhone iPad HDMI ADVANCED MCACC FL OFF
MCACC SETUP MIC 5V 2.1 A with USB HDMI 5 INPUT/ MHL (5V 0.9 A)
5V 2.1 A
with USB HDMI 5 INPUT/
MHL (5V 0.9 A)
iPod/iPhone/iPad
USB cable included with the iPod
Tip
! An iPod/iPhone/iPad can be connected to the receiver. For details on supported models and versions of the
respective products, see Playing an iPod on page 41 .
% Switch the receiver into standby, and then use the iPod cable to connect your iPod to the
iPod/iPhone/iPad terminal on the front panel of this receiver.
! For the cable connection, also refer to the operating instructions for your iPod.
! When connecting an iPhone to this unit, keep the iPhone at least 20 cm away from this unit. If the iPhone is
kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this device.
! iPod recharging occurs whenever an iPod is connected to this unit. (Recharging is enabled only when the
unit’s power is turned on.)
! For instructions on playing the iPod, see Playing an iPod on page 41 .
Use a dedicated cable to enjoy iPod video
If an iPod is connected using a dedicated iPod connection cable (sold separately), then video from the iPod can
also be enjoyed on a TV that is connected to the receiver.
! The iPod cable is not included with this receiver. The optional iPod cable from Pioneer is sold separately under
the part number L308102013030-IL.
Contact the Pioneer Customer Support division for more information on obtaining an optional iPod cable.
! iPhone5, iPad 4th generation, iPad mini, iPod touch 5th generation and iPod nano 7th generation cannot be
connected using a separately sold iPod cable.
MASTER VOLUME
STANDBY/ON
INPUT SELECTOR
iPod iPhone iPad DIRECT CONTROL ECO ADVANCED SURROUND STANDARD SURROUND AUTO SURR/ALC/ STREAM DIRECT
PHONES
SPEAKERS CONTROL – MULTI-ZONE – ON / OFF BAND TUNER EDIT TUNE PRESET ENTER
iPod iPhone iPad HDMI ADVANCED MCACC FL OFF
MCACC SETUP MIC 5V 2.1 A with USB HDMI 5 INPUT/ MHL (5V 0.9 A)
5V 2.1 A
with USB HDMI 5 INPUT/
MHL (5V 0.9 A)
iPod/iPhone/iPad
iPod cable