Pioneer VSX-923-S - Manual (Page 32)

32
03
Connecting your equipment
Connecting a USB device
It is possible to play audio and photo files by connecting USB devices to this receiver.
MASTER VOLUME
STANDBY/ON
INPUT SELECTOR
iPod iPhone iPad DIRECT CONTROL ECO ADVANCED SURROUND STANDARD SURROUND AUTO SURR/ALC/ STREAM DIRECT
PHONES
SPEAKERS CONTROL – MULTI-ZONE – ON / OFF BAND TUNER EDIT TUNE PRESET ENTER
iPod iPhone iPad HDMI ADVANCED MCACC FL OFF
MCACC SETUP MIC 5V 2.1 A with USB HDMI 5 INPUT/ MHL (5V 0.9 A)
5V 2.1 A
with USB HDMI 5 INPUT/
MHL (5V 0.9 A)
USB mass
storage device
% Switch the receiver into standby then connect your USB device to the USB terminal on the
front panel of this receiver.
! This receiver does not support a USB hub.
! For instructions on playing the USB device, see
Playing a USB device on page 42 .
Connecting an MHL-compatible device
An MHL-compatible mobile device can be connected to enjoy 3D/Full-HD videos, high quality multi-channel
audio, and photos etc., with charge the battery on the receiver. Use the MHL cable to connect the device.
MASTER VOLUME
STANDBY/ON
INPUT SELECTOR
iPod iPhone iPad DIRECT CONTROL ECO ADVANCED SURROUND STANDARD SURROUND AUTO SURR/ALC/ STREAM DIRECT
PHONES
SPEAKERS CONTROL – MULTI-ZONE – ON / OFF BAND TUNER EDIT TUNE PRESET ENTER
iPod iPhone iPad HDMI ADVANCED MCACC FL OFF
MCACC SETUP MIC 5V 2.1 A with USB HDMI 5 INPUT/ MHL (5V 0.9 A)
5V 2.1 A
with USB HDMI 5 INPUT/ MHL (5V 0.9 A)
MHL enabled
device
MHL cable
% Switch the receiver into standby then use the MHL cable to connect your MHL enabled
device to the MHL terminal on the front panel of this receiver.
! To automatically switch to the MHL input when an MHL-compatible device is connected, see MHL Setup on
page 87 .
! The MHL-compatible device is recharged whenever it is connected to this unit. (Recharging is enabled only
when the unit’s power is turned on.)
! For instructions on playing the MHL-compatible device, see Playing an MHL-compatible device on page 43 .
Connecting an HDMI-equipped component to the front panel
input
MASTER VOLUME
STANDBY/ON
INPUT SELECTOR
iPod iPhone iPad DIRECT CONTROL ECO ADVANCED SURROUND STANDARD SURROUND AUTO SURR/ALC/ STREAM DIRECT
PHONES
SPEAKERS CONTROL – MULTI-ZONE – ON / OFF BAND TUNER EDIT TUNE PRESET ENTER
iPod iPhone iPad HDMI ADVANCED MCACC FL OFF
MCACC SETUP MIC 5V 2.1 A with USB HDMI 5 INPUT/ MHL (5V 0.9 A)
5V 2.1 A
with USB HDMI 5 INPUT/
MHL (5V 0.9 A)
Video camera (etc.)
Connecting to a wireless LAN
Wireless connection to the network is possible through a wireless LAN connection. Use the separately sold
AS-WL300 for connection.
! Use only the furnished accessory connecting cable.
! Certain settings are required to use a wireless LAN converter (AS-WL300). For instructions on making these
settings, see the operating instructions included with the wireless LAN converter (AS-WL300).
LAN (10/100)
( OUTPUT 5 V 0.6 A MAX)
DC OUTPUT for WIRELESS LAN
DC OUTPUT
for WIRELESS LAN
LAN (10/100)
( OUTPUT 5 V
0.6 A MAX)
WAN
DC 5V WPS Ethernet
Internet Modem
Wireless LAN converter (AS-WL300)
Router