Pioneer DEH-P9800BT - Manual (Page 18)

! There is sometimes a delay between starting
up CD playback and the sound being issued.
When being read,
Format read is displayed.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT to eject the disc, and check the
disc for damage before inserting it again.
! When the CD loading or ejecting function
does not operate properly, you can eject the
CD by pressing and holding
EJECT while
opening the front panel.
! If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 103.
Adjusting the volume
% Use MULTI-CONTROL to adjust the
sound level.
With the head unit, turn
MULTI-CONTROL to
increase or decrease the volume.
With the remote control, press
VOLUME to in-
crease or decrease the volume.
Turning the unit off
% Press SOURCE and hold until the unit
turns off.
Basic Operations
En
18
Section
03