Introduction of audio adjustments, Audio adjustments – Pioneer DEH-P9800BT User Manual
Page 81
Introduction of audio
adjustments
1
1
1
Important
When phone is selected as a source, no audio ad-
justments, except balance adjustment, are possi-
ble.
1 Audio display
Shows the audio adjustment status.
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option; press to se-
lect.
The audio function name appears on the dis-
play.
3
Turn MULTI-CONTROL to select the
audio function.
Turn
MULTI-CONTROL clockwise or counter-
clockwise to switch between the audio func-
tions in the following order:
Fader (balance adjustment)
—Position (posi-
tion selector)
—TA Mode (time alignment set-
ting)
—Time Alignment (time alignment
adjusting)
—Loudness (loudness)—Powerful
(graphic equalizer adjustment)
—FREQ. (16-
band graphic equalizer adjustment)
—
Subwoofer1 (subwoofer on/off)
—
Subwoofer2 (subwoofer cut-off frequency)
—
Subwoofer3 (subwoofer slope)
—Front HPF
(front high pass filter slope)
—
Front HPF FREQ. (front high pass filter cut-off
frequency)
—Rear HPF (rear high pass filter
slope)
—Rear HPF FREQ. (rear high pass filter
cut-off frequency)
—BBE (BBE)—COMP/BMX
(Compression and BMX)
—Auto EQ (auto-
equalizer on/off)
—ASL (automatic sound leve-
lizer)
—SLA (source level adjustment)—
AUI sound level (auditory user interface)
# When selecting OFF in TA Mode, you cannot
switch to
Time Alignment.
# You can select Subwoofer2 and
Subwoofer3 only when subwoofer output is
turned on in
Subwoofer1.
# When tuner, television or AUX is selected as a
source, you cannot select
COMP/BMX.
# When selecting the FM tuner as the source,
you cannot switch to
SLA.
# To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Audio Adjustments
En
81
English
Section
14