Pioneer DEH-P9800BT - Manual (Page 47)

2 Push MULTI-CONTROL up or down to
select a registration assignment.
Each time
MULTI-CONTROL is pushed up or
down, the registration assignment is switched
in the following order:
Phone1 (user phone 1)
—Phone2 (user phone
2)
—Phone3 (user phone 3)—Guest1 (guest
phone 1)
—Guest2 (guest phone 2)
# If the assignment is empty, No data is dis-
played and the operation is not possible.
# If you need to know the BD (Bluetooth Device)
address of the phone, push
MULTI-CONTROL left
here.
3 Push MULTI-CONTROL right to select
Delete YES.
Delete YES is displayed. Deleting phone is
now on standby.
4 Press MULTI-CONTROL to delete the
phone.
After the phone is deleted,
Deleted is dis-
played.
Connecting to a registered
cellular phone
Once your phone is registered with this unit it
is a simple matter to establish a Bluetooth
wireless connection, either manually by select-
ing a registration assignment, or automatically
when a registered phone is within range.
Connecting to a registered
phone manually
Select a phone from the registration assign-
ments to connect to the phone manually.
1 Use MULTI-CONTROL to select
Connect phone in the function menu.
Connect phone appears in the display.
2 Push MULTI-CONTROL up or down to
select a registration assignment.
Each time
MULTI-CONTROL is pushed up or
down, the registration assignment is switched
in the following order:
Phone1 (user phone 1)
—Phone2 (user phone
2)
—Phone3 (user phone 3)—Guest1 (guest
phone 1)
—Guest2 (guest phone 2)
# If the assignment is empty, No data is dis-
played and the operation is not possible.
# If you need to know the BD (Bluetooth Device)
address of the phone, push
MULTI-CONTROL left
here.
3 Press MULTI-CONTROL to connect the
selected cellular phone.
While connecting,
Connecting is displayed.
After the connection is completed, Connected
is displayed.
Connecting to a registered
phone automatically
When Automatic Connection is active the unit
will automatically establish a connection with
a registered phone when it comes into range.
! This feature may not work with all phones.
If your registered phone fails to connect
with Automatic Connection, use the man-
ual connection method explained in Con-
necting to a registered phone manually on
this page.
! This feature is not possible if you are play-
ing back songs on your Bluetooth audio
player via Bluetooth wireless technology. In
such case, stop the playback and switch to
another source for your cellular phone to
connect to this unit through this function.
! While you are operating in the function
menu of Telephone source or BT Audio
source, this unit does not initiate an auto-
matic connection to your registered phone.
! This feature cannot be set for each different
user phone.
Bluetooth Telephone
En
47
English
Section
08