Pioneer VSX-D810S - Manual (Page 24)

24
En
Displays & Controls
8 LOUDNESS button
Use to switch on the loudness. This feature is useful
for getting good bass and treble sounds listening at
low volumes.
FL DIMMER button
Use this button to make the fluorescent display (FL)
dimmer or brighter. There are three brightness
settings as well as an off setting.
SETUP button (see page 37-40)
Use this button when setting up the remote control to
control other components.
MUTING button
Use to mute the sound or restore the sound if it has
been muted.
9 THE FOLLOWING BUTTONS ARE DEDICATED
TV CONTROL BUTTONS. THEY ARE ONLY
USED FOR CONTROLLING YOUR TV.
TV FUNC button
Use to select the TV function.
TV button
Use to turn on/off the power of the TV.
TV VOLUME +/– buttons
Use to adjust the volume on your TV.
0 MENU button
Use to access different menus associated with your
DVD player. To use first press the
DVD button then
operate this button.
- MASTER VOLUME +/– buttons
Use to set the overall listening volume.
= CHANNEL +/– buttons
Use to skip tracks backward or forward on CDs,
DVDs, etc and change channels on the VCR, DVR, etc.
~ @ # % fi ( TUNE/ST +/–) & ENTER buttons (see
pages 15-20)
Use these arrow buttons when setting up your
surround sound system (see pages 15-19). These
buttons are also used to control DVD menus/options
and for deck 1 of a double cassette deck player (see
pages 41). The TUNE/ST +/– buttons can be used to
find radio frequencies and preset stations, respec-
tively (see pages 30,32).
! DISC button
Use to select a disc and a multi-CD player. To use
first press the
CD button then operate this button.
@ RECEIVER (POWER) button
This switches between STANDBY mode and power
ON for this receiver.
# LED DISPLAY (see pages 37-40)
This display flashes when a command is sent from
the remote control to the receiver. It also flashes at
other times, for example when teaching the receiver
preset codes, with specific meanings.
5 THE FOLLOWING BUTTONS ARE BOTH
CONTROLS FOR OTHER COMPONENTS (LIKE
A DVD PLAYER) AND DEDICATED TUNER
CONTROLS. THE TUNER CONTROLS ARE
EXPLAINED HERE. YOU CAN USE THEM
AFTER YOU HAVE PUSHED THE TUNER MULTI
CONTROL BUTTON.
BAND button (see pages 30-32)
Use to switch between the AM and FM band when in
TUNER mode.
CLASS button (see page 31-32)
Use to switch between the three banks (classes) of
station memories.
MPX button (see page 30)
Use to switch between auto stereo and mono
reception of FM broadcasts. If the signal is weak then
switching to MONO will improve the sound quality.
D. ACCESS button (see page 31)
Use to directly access a radio station by pressing the
number of the station you want.
DISPLAY button (see page 33)
Use to display the RDS information.
RF ATT button (see page 30)
Use to lower the input level of a radio signal that is
too powerful or contain interference thus causing the
receiver to distort.
6 2 /DTS button (see pages 25, 27)
Use to put the receiver in DOLBY DIGITAL, DOLBY
SURROUND and DTS modes. To use first press the
RCV button then operate this button.
DSP button (see pages 26, 28)
Use to put receiver in one of the DSP modes. To use
first press the
RCV button then operate this button.
TEST TONE button (see page 20)
Use to sound the TEST TONE when setting up the
surround sound of the receiver (the 2 /DTS mode
must be on). To use first press the
RCV button then
operate this button.
SIGNAL SELECT (see page 27)
Use to select the proper signal (analog, digital) for the
source your are inputting. On the VSX-D810S receivers
there is an AUTO setting. In this setting the receiver
will automatically switch between the analog and
digital signals according to what is being input. If both
signals are input the AUTO setting will choose the
digital one. This setting is convenient as the receiver
will always choose the best or appropriate signal. To
use first press the
RCV button then operate this button.
7 CH SELECT button (see page 20)
Use to select a speaker when setting up the surround
sound of the receiver.
CH LEVEL +/– (see page 20)
Use to set up the levels of the surround sound of the
receiver.
FUNCTION button
Use to select the playback or recording source. This
button lets you cycle through the different functions
of the receiver in the following order: CD, TUNER,
AUX, CDR/TAPE, VCR/DVR, DVD/LD, DVD 7.1 ch,
VIDEO, and TV/SAT (VSX-D810S).
CD, TUNER, AUX, CDR/TAPE, VCR/DVR, DVD/LD,
VIDEO, and TV/SAT (VSX-D710S).