Brocade Communications Systems ServerIron ADX 12.4.00a - Manual (Page 210)

196 ServerIron ADX Security Guide
53-1002440-03
SSL debug and troubleshooting commands
6
Displaying the certificate bound to an SSL profile
Use the show ssl profile cert command on the rconsole, as shown in the following, to display the
certificate bound to a specified profile. This is useful when checking to see if a certificate is intact
on the BPs.
ServerIronADX# rconsole 1 1
ServerIronADX1/1# show ssl profile prof1 cert
SSL profile : prof1
Certificate:
Data:
Version: 00000003 (0x00000002)
Serial Number: 00000002 (0x00000002)
Signature Algorithm: sha1WithRSAEncryption
Issuer: C=us, ST=ca, L=sj, O=brocad, OU=web, CN=www.brocade.com
Validity
Not Before: Jun 3 12:53:01 2009 GMT
Not After : Jun 3 12:53:01 2010 GMT
Subject: C=us, ST=ca, L=sj, O=brocad, OU=web, CN=www.brocade.com
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
RSA Public Key: (1024 bit)
Modulus (1024 bit):
00:d9:ef:2b:51:f9:70:b3:67:f3:17:e2:10:29:f5:
4d:43:8d:38:6f:bc:64:bf:92:1d:ec:4b:53:3a:3d:
cf:f9:35:72:55:18:b5:eb:ea:46:4a:68:2d:20:de:
f0:6f:05:24:89:a5:d6:a8:67:66:fe:db:5a:3d:5f:
8d:44:31:6f:6d:cc:17:8f:7a:a1:7b:49:8a:25:29:
eb:d5:5c:a9:58:20:43:f2:57:0b:7c:09:a5:8a:ac:
bc:71:c3:6f:58:9e:41:3f:60:8d:8d:94:a4:3c:dd:
1e:53:dd:9e:21:e7:c8:1e:58:e8:d5:cf:0c:41:84:
57:e9:9f:ad:9a:e8:16:61:f1
Exponent: 00010001 (0x00010001)
Signature Algorithm: sha1WithRSAEncryption
59:0b:30:f0:06:c6:2c:b3:73:d3:40:91:5c:47:bb:d4:9c:ae:
bb:d3:61:90:8a:d4:04:ee:81:a2:57:6e:76:a3:0b:a2:1a:08:
9d:ce:d3:4a:95:ab:ef:62:36:6b:bc:ba:30:e3:4a:ce:1a:79:
fe:b3:95:d6:4c:57:2d:3d:12:a9:b6:cf:aa:7d:80:83:1d:d2:
3f:49:47:1e:d8:1f:94:47:ae:2b:f7:68:4f:51:eb:8e:30:df:
d5:27:cd:d4:41:1a:11:85:a6:d1:1c:5b:c0:1a:60:f6:52:f0:
8c:bd:d8:a0:56:cf:88:97:95:f4:30:e6:78:65:0e:ac:b7:80:
fa:23
Syntax: show ssl profile <profile-name> cert
The <profile-name> variable specifies name of the profile that you want to display the certificate
for.
Displaying the key that is bound to an SSL profile
Use the show ssl profile key command on the rconsole, as shown in the following, to display the key
bound to a specified profile. This is useful when checking to see if a key is intact on the BPs.
ServerIronADX# rconsole 1 1
ServerIronADX# show ssl profile test1 key
SSL profile : test1
Key file : \usb0\certstor\key7.key
Private-Key: (1024 bit)
modulus: