Brocade Communications Systems ServerIron ADX 12.4.00a - Manual (Page 35)

ServerIron ADX Security Guide 21
53-1002440-03
Displaying HTTP TRL
1
Syntax: port http
ServerIronADX(config-rs-web2)# exit
Syntax: exit
5. Define a virtual server with an IP address.
ServerIronADX(config)# server virtual-name-or-ip csw-vip 1.1.1.100
Syntax: server virtual-name-or-ip <vip-name-or-ip-address> <ip-address>
6. Define a virtual HTTP port on the virtual server.
ServerIronADX(config-vs-csw-vip)#port http
Syntax: port http
7. Bind HTTP ports on real servers web1 and web2 to the virtual port HTTP.
ServerIronADX(config-vs-csw-vip)# bind http web1 http web2 http
Syntax: bind http <real-server> http <vip-name>
Creating a CSW rule and policy with HTTP TRL
1. Define a CSW rule to match a pattern in the HTTP header that contains the client name.
ServerIronADX(config)# csw-rule rule1 header Authorization pattern Basic
Syntax: csw-rule <rule-name> header <Authentication> pattern <Basic>
2. Define a CSW policy.
ServerIronADX(config)# csw-policy policy1
Syntax: csw-policy <policy-name>
3. Specify an action to apply HTTP TRL policy when the CSW rule is matched.
ServerIronADX(config-csw-policy1)# match rule1 http-trl p1
Syntax: match <rule-name> http-trl <http-trl-policy-name>
Enabling Layer 7 SLB
To configure Layer 7 SLB, follow these steps.
1. Bind the policy to a virtual HTTP port on the virtual server.
ServerIronADX(config-vs-csw-vip)# port http csw-policy policy1
Syntax: port http csw-policy <policy-name>
2. Enable CSW on the virtual port.
ServerIronADX(config-vs-csw-vip)# port http csw
Syntax: port http csw
Displaying HTTP TRL
This section describes how to display HTTP TRL information.