B&K CT600 - Manual (Page 66)

Setup Using the On Screen Display
Setup Using the On Screen Display
M MAIN M MENU
1 Z Zone O Operation
2 Z Zone F Favorite P Presets
3 A Audio/Video S System S Setup
4 C Control S System S Setup
5 M Memory B Backup/Restore
6 S System S Status
↑↑↓↓ nnext iitem SSEL sselect
M MENU e exit m menu s system
It is possible to completely program the CT Receiver via the on-screen menus or the front panel dis-
play. However, it is not nearly as fast and straightforward as using a PC and BKcSuite. Nevertheless,
it is often convenient to touch up one or two parameters of the system using the on-screen or front
panel menus. Please note that the CT602/300 does not have front panel buttons or a display. All on
screen setup on a CT602/300 must be done through the zone A video output run to a monitor
accessed by remote control. Remote control access to the on screen menu is limited to zone A only.
The on screen menu cannot be accessed by any zone other than zone A.
B K
&
S B
I M P LY E T T E R !
62