Pioneer CT-L77 - Manual (Page 22)

4 Switching On
22
Using Dolby NR.
For best sound quality, tapes that are recorded with Dolby NR should be played with
Dolby NR switched on. This includes virtually all commercially produced tapes—look
for the double – D symbol (2) on the inlay card, or on the cassette tape itself. To
switch Dolby NR on and off:
1 Press MENU.
The tape menu options are:
2 Use
$ or › to select DOLBY NR, then
press SET.
3 Press
$ or › to switch between Dolby
NR on and off.
4 Press SET again to exit the menu.
The Dolby NR indicator (2 NR) lights in the display when Dolby NR is on.
$
REVERSE MODE
›
DOLBY NR – COUNTER RESET
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
MENU SET
4 ¢
The Dolby NR indicator lights
when Dolby NR is switched on
• Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
• “DOLBY”, and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.