Pioneer CT-L77 - Manual (Page 28)

6 Using the Tuner
28
Listening to a Memorized Station
When using the tuner button to switch between FM and AM, you've probably noticed a
third option. This is the station memory mode, in which you can listen to the stations
you’ve previously memorized.
1 Press TUNER repeatedly until the display
looks something like the display left.
Remember: the TUNER button gives you access to FM and AM bands, as
well as the station memories.
2 Use the
$ and › buttons to step
through the station memories.
The tuner will jump immediately to the frequency in the station memory.
Unless you've given the station memory a name (see below for how to do
this), the display shows the station memory number and the frequency.
Giving a Station Memory a Name
If you've set up more than a couple of station memories, you'll probably want to give
them names that are a little more memorable than "FM 98.70." Normally, of course,
the name will be that of the radio station.
1 Recall the station memory you want to
name.
See Listening to Memorized Stations above for detailed instructions on this.
2 Press MENU and select STATION NAME.
Remember: switch between menu options using the
$ and ›
buttons; select the option by pressing SET .
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
TUNER
4 ¢
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
MENU
4 ¢
TUNER
SET
CHARACTER
In station memory mode the
display shows the station
memory number and the
frequency