Pioneer DDJ-WeGO2 - Manual (Page 17)

En 17
Advanced
Operation
Making the SAMPLER settings
The [SAMPLER] volume, etc., can be adjusted through operations on the
computer.
1 Click [ ] on the computer’s screen to switch
to the [SAMPLER]screen.
2 Operate the function on the computer’s screen.
1
2
3
4
1 Opens the [SAMPLER] options screen. Set for example whether
or not to play the [SAMPLER] in sync with the currently playing
track.
2 Selects the [SAMPLER] playing mode (play just once or play
repeatedly).
3 Adjusts the [SAMPLER]’s volume.
4 Recording starts when the [REC] button is pressed. When the
[REC] button is pressed again, recording stops.
Operating four decks ( rJ)
With VIRTUAL DJ LE, you can select either a 2-deck layout or a 4-deck
layout.
This unit supports operation with a 4-deck layout.
1 Click the [ ] button on the computer’s screen to
switch the deck layout.
2 Press the [DECK] button to switch the deck to be
operated.
The [DECK C] button lights when deck C is selected, the [DECK D] button
lights when deck D is selected.
! When the 4-deck layout is selected, the decks can be switched from
the buttons on the computer screen as described below.
— Press the [DECK C] button: Switches the deck on the left side.
(Deck A t Deck C)
— Press the [DECK D] button: Switches the deck on the right side.
(Deck B t Deck D)
! With a 4-deck layout, the outputs of the respective decks can be
assigned to either the left or right sides of the crossfaders using the
assign buttons at the sides of the crossfaders on the computer’s
screen.
! When the decks are switched, the positions of the controls and fad-
ers on the computer screen and on this unit may differ.
In such cases, move the controls and faders on this unit to the same
positions as the controls and faders on the computer’s screen.
The controls and faders for which this operation is required when the
decks are switched are as follows:
— TEMP
O slider
— EQ (HI, MID, LOW) controls
— Channel fader