Mounting the iphone/ipad stand, Checking the version of the driver software – Pioneer DDJ-WeGO2 User Manual

Page 7

Advertising
background image

En

7

Before

you

start

 If there are interruptions in the sound with the

default settings

Set the kernel buffer size to [4], then set the buffer
size to the minimum value at which there are no
interruptions in the sound.

 If there are no interruptions in the sound with

the default settings

1 Gradually decrease the buffer size, setting it to the
minimum value at which there are no interruptions in
the sound.

2 Set the kernel buffer size to [2] and check whether
there are interruptions in the sound.

! If there are interruptions in the sound, set the kernel buffer size to

[3].

Checking the version of the driver

software

Click the Windows [Start] menu>[All Programs]>
[Pioneer]>[DDJ_WeGO2]>[DDJ_WeGO2 Version Display
Utility].

! For Windows 8, click [DDJ_WeGO2 Version Display Utility] from

the [Start] screen.

! You can check the firmware version of this unit on the screen.
! The firmware version is not displayed when this unit is not connected

to the computer or when this unit and computer are not properly
communicating.

Mounting the iPhone/iPad stand

To use an iPhone/iPad, mount the included iPhone/iPad stand.

WARNING

Keep the included screws and the screw covers that have been
removed from the unit out of the reach of children. If they should be
swallowed, contact a physician immediately.

1 Remove the three screw covers.

2 Fasten the included screws in the order shown on the
diagram below.

! Do not use any screws other than the included ones.

Cautions on using the iPhone/iPad stand

! This stand is exclusively for use with an iPhone/iPad. Do not place

tablets other than iPads or large devices on the stand.

! Set the iPhone/iPad on the stand in the horizontal direction. It may

be unstable if set in the vertical direction.

! Do not apply excessive force to the stand. Doing so may damage this

unit.

! Please note that Pioneer will accept no responsibility whatsoever for

damage to or malfunction of the device, injury, etc., due to the device
falling, etc.

! Do not move with an iPhone/iPad placed on the stand. The iPhone/

iPad could fall off.

! If there is a cover on the iPhone/iPad, remove the cover before plac-

ing the iPhone/iPad on the stand. If the cover is left on, the iPhone/
iPad could be unstable.

iOS devices that can be used with this unit and placed on
the stand

! iOS

iOS 6

! Devices supporting the iPhone/iPad connection cable (Lightning)

iPad (4th generation), iPad mini, iPhone 5, iPod touch (5th
generation)

For the latest information on iOS devices, see [DDJ-WeGO2] on the
Pioneer DJ support site below.
http://pioneerdj.com/support/

Advertising