Pioneer MVH-350BT - Manual (Page 17)

Common
Message Cause Action
AMP ERROR Unit fails to op-
erate or speaker
connection is
incorrect; pro-
tective circuit is
activated. Check the speak-
er connection. If
the message fails
to disappear even
after the engine is
switched off/on,
contact your deal-
er or an author-
ized Pioneer
Service Station
for assistance.
USB storage device/iPod
Message Cause Action
FORMAT
READ Sometimes
there is a delay
between the
start of playback
and when you
start to hear any
sound. Wait until the
message disap-
pears and you
hear sound.
NO AUDIO There are no
songs. Transfer the audio
files to the USB
storage device
and connect.
The connected
USB storage de-
vice has secur-
ity enabled. Follow the USB
storage device in-
structions to dis-
able the security.
SKIPPED The connected
USB storage de-
vice contains
files embedded
with Windows
Media
ä DRM 9/
10.
Play an audio file
not embedded
with Windows
Media DRM 9/10.
Message Cause Action
PROTECT All the files in
the USB storage
device are em-
bedded with
Windows Media
DRM 9/10. Transfer audio
files not em-
bedded with
Windows Media
DRM 9/10 to the
USB storage de-
vice and connect.
N/A USB The USB device
connected to is
not supported
by this unit. ! Connect a USB
Mass Storage
Class compliant
device.
! Disconnect
your device and
replace it with a
compatible USB
storage device.
CHECK USB The USB con-
nector or USB
cable has short-
circuited. Check that the
USB connector or
USB cable is not
caught in some-
thing or dam-
aged.
CHECK USB The connected
USB storage de-
vice consumes
more than maxi-
mum allowable
current. Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only
compliant USB
storage devices.
Message Cause Action
CHECK USB The iPod oper-
ates correctly
but does not
charge. Make sure the
connection cable
for the iPod has
not shorted out
(e.g., not caught
in metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
ERROR-19 Communication
failed. Perform one of
the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to
the USB source.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod
’s main
menu is dis-
played, reconnect
the iPod and reset
it.
ERROR-23 USB storage de-
vice was not for-
matted with
FAT12, FAT16 or
FAT32. USB storage de-
vice should be for-
matted with
FAT12, FAT16 or
FAT32.
Message Cause Action
ERROR-16 The iPod firm-
ware version is
old. Update the iPod
version.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod
’s main
menu is dis-
played, reconnect
the iPod and reset
it.
STOP There are no
songs in the
current list. Select a list that
contains songs.
NOT FOUND No related
songs. Transfer songs to
the iPod.
Bluetooth device
Message Cause Action
ERROR-10 The power failed
for the
Bluetooth mod-
ule of this unit. Turn the ignition
switch OFF and
then to ACC or
ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
please contact
your dealer or an
authorized
Pioneer Service
Station.
English
Additional information
17
Appendix
Additional information
En