Pioneer DJM-T1 - Manual (Page 16)

16 En
Synchronizing the playing speed with other
decks (beat sync)
1 Press the [SYNC (MASTER)] button while pressing the
[SHIFT] button on the currently playing deck.
The deck whose button was pressed is set as the master for synchronization.
2 Press the [SYNC (MASTER)] button on the deck not set as
the master for synchronization.
The [BPM] and [Beat Grid] of the track for the deck not set as the master for syn-
chronization are synchronized to the [BPM] and [Beat Grid] of the track for the deck
set to the master for synchronization.
! For information about setting the master for synchronization, see Setting the
master for synchronization on page 16.
! The beat sync function may not operate properly in the following cases.
— When the loop length is under 1 beat.
— When the track has not been analyzed.
 Setting the master for synchronization
TRAKTOR
Click [ ].
The master for synchronization can be selected from one of the two types below.
— [MASTER]: The BPM value input by the user or the BPM value set by tapping
is set as the master.
— [AUTO]: The master is set automatically. When two decks are playing and
the deck set as the master is paused, the other deck is automatically set as
the master.
! When using TRAKTOR SCRATCH DUO 2, this is always set to [AUTO]. If you
upgrade to TRAKTOR SCRATCH PRO 2, you can select [MASTER] or [AUTO].