Pioneer CNDV-50MT - Manual (Page 27)

25
Ch
ap
te
r
2
Se
tti
n
g
a
R
ou
te
to Y
o
ur De
st
in
at
io
n
Searching the facilities around
the scroll cursor
1
Scroll the map and move the scroll cursor
to the place you want to search POI.
2
Touch .
See Step 2 of “Finding a POI in your
surroundings” for the following operations.
➲
Finding a POI in your surroundings ➞
Page 24
❒ The distance indicated in the list of the
search result is the distance from the
scroll cursor to the facility.
❒ “Vicinity Search” in the Main menu
searches your surroundings. On the other
hand, in the case of
in the Shortcut
menu (➞ Page 17), the area around the
scroll cursor will be searched.
Setting an Entrance or Exit of a
Motorway as Your Destination
You can set the entrance or exit of a motorway as
your destination.
1
Touch “Destination” in the Main menu,
and then touch “Motorway Search”.
The display for entering the name of the
motorway appears.
2
Touch the country key of the destination
country and touch “OK”.
3
Enter the name of the motorway and
touch “OK”.
The list of motorways matching the name
appears.
4
Touch the motorway.
The display for selecting your destination to
the entrance or to the exit of the motorway
appears.
5
Touch “Entrance” or “Exit”.
The list of entrances to, or exits from, the
selected motorway appears.
6
Touch your destination.
❒
You can also see the destination by
touching the
on the right of the list.
➲ Searching the destination by map ➞
Page 21
Finding Your Destination by
Specifying the Post Code
If you know the post code of your destination, you
can use it to find your destination.
1
Touch “Destination” in the Main menu,
then touch “Postal Code Search”.
The post code input screen appears.
2
Touch the country key of the destination
country and touch “OK”.
3
Input the post code.
A list of cities with the specified postal code is
shown.
British post code:
If you input a British postal code, the map
with the cursor on the selected position is
shown. When you touch “OK”, a route search
begins.
Netherlands post code:
• If you input a complete post code, a list of
street is shown.
• If you input a partial post code, and touch
“OK”, a list of cities is shown.
4
Search for your destination in accordance
with the procedures after Step 5 in
Chapter 1 “Basic Operation”.
❒ Depending on the destination, the search may
start directly.
❒ Not all post codes are recorded on the disc.
Thus, you may not be able to find the location
corresponding to the post code you enter.
MAN-CNDV-50MTP-EN.book Page 25 Friday, April 29, 2005 10:33 AM