Pioneer CNDV-50MT - Manual (Page 42)

40
Ch
ap
te
r
3
E
d
it
in
g t
h
e Na
viga
ti
o
n
Ut
il
it
ie
s
Using Traffic Information
You can check traffic jam transmitted by the FM
radio service through the Radio Data System
(RDS-TMC) on the display. Such traffic jam is
updated periodically. When you receive traffic
jam, the Navigation System automatically
displays an icon informing you of the traffic jam.
You can also select whether to recalculate the
route to avoid a traffic jam. (In this case, route
calculation is carried out by considering traffic
jam within a 150 km (92 mile) radius from your
current location.)
❒ The “traffic jam” in this section indicated the
following types of traffic information; stop and
go, stopped traffic, closed/blocked roads.
Viewing traffic information
Checking all traffic information
1
Touch “Information” in the Main menu,
then touch “RDS-TMC”.
The list with received traffic information is
shown.
2
Touch or to view the incident list.
Places where incidents have occurred are
displayed in the list.
1. Road number (or street name)
2. Place name
3. Direction to the spot
4. Incident
5. Distance from the current location
6. The incident numbers currently
displayed and the total number of
incidents
❒ The incidents that have already been read,
will be displayed in white. Unread
incidents will be in yellow.
❒ Touching the allows you to check the
place on a map. (Traffic information
without positional information cannot be
checked on a map.)
:
You can sort the traffic information in
alphabetical order.
:
You can sort the traffic information according
to the incident (In the order of accident, jams,
road works, and others).
:
You can sort the traffic information by
distance (from your current location).
:
When new traffic information is received,
current information is changed, or old
information has been removed, the list is
updated to reflect the new situation.
3
Select an incident you want to view in
detail.
The details of the selected incident are
displayed.
❒
Touching an incident you want to see
allows you to view the detailed information
of the incident. If the information cannot
be displayed on one screen, touch or
to view the remaining information.
4
Touch “Back” to return to the list with
traffic information.
A list with traffic information appears again.
Checking traffic information on the
route
1
Touch “Information” in the Main menu,
and then touch “Traffic On Route”.
The currently set traffic information on the
route appears on the screen.
❒
The method for checking the content
displayed on the screen is the same for
“Checking all traffic information”.
➲ Checking all traffic information ➞ Page 40
4
1 2 3 5 6
MAN-CNDV-50MTP-EN.book Page 40 Friday, April 29, 2005 10:33 AM