Pioneer CNDV-50MT - Manual (Page 45)

43
Ch
ap
te
r
3
E
d
it
in
g t
h
e Na
viga
tio
n
Ut
il
it
ie
s
Alternative option:
Store:
Add the current RDS-TMC station in the
preset list. If there are already five stations
stored in the list, select one to be overwritten.
❒
If you want to continue to search for
another station, repeat this procedure.
3
Touch “OK”.
Returns to the Information menu.
Selecting from pre-registered RDS-
TMC stations
You can pre-select up to five RDS-TMC stations
(Preset Station). From the list of the RDS-TMC
stations, you can select the one you want to
receive.
1
Touch “Information” in the Main menu,
then touch “Manual Station Search”.
The list of registered RDS-TMC stations
appears. This list of broadcasting stations
(Preset Station) cannot be used unless those
broadcasting stations have been stored.
2
Select a radio station from the list.
Switching to the specified RDS-TMC station.
Using a PC Card
You can store the following information on a PC
Card (sold separately):
• Locations registered manually such as your
home, your favourite location, or a location
whose information was edited (Registered
Locations)
• Information on when you travelled, on where
you have come from and gone to, and the
distance from starting point to destination
(Driving Log History)
• Background image when navigation or audio is
operated (Background Picture)
❒ The PC card is very useful for sharing the data
in the Address Book with friends or for
storing the data as backup.
❒ If a PC card is not inserted in the navigation
system correctly, PC card functions are not
available.
❒ For details of PC cards that support this
system, refer to the following.
– If you are using “AVIC-9DVD” or “AVIC-
8DVD”, refer to the “Operation Manual”.
– If you are using models other than the
above, refer to the “Hardware Manual”.
Initialising a PC card
Before using a brand new PC card, you must
initialise it.
1
Touch “Information” in the Main menu,
then touch “PC card” and “Initialise PC
Card”.
❒
Do not cut off the power supply for the
navigation system (or turn the ignition
switch to ACC OFF) until initialisation of
the PC card is complete.
2
Touch “Yes”.
If you want to cancel the initialisation, touch
“No”.
The currently selected RDS-TMC station
The currently selected RDS-TMC station
MAN-CNDV-50MTP-EN.book Page 43 Friday, April 29, 2005 10:33 AM