Bissell 5288 - Manual (Page 5)

16
w w w . b i s s e l l . c o m
5
w w w . b i s s e l l . c o m
This user’s guide has been designed to help you
get the utmost satisfaction from your Flip-Ease
cordless hard floor cleaner. You’ll find assembly
directions, instructions for all cleaning tasks, safety
precautions, plus maintenance and troubleshooting
instructions. Please read this user's guide thoroughly
before using your Flip-Ease. Pay particular attention
to the parts diagram, assembly instructions, and part
names. Familiarize yourself with the controls and
how they’re used. Following this user's guide will
greatly enhance your ability to get the best
performance from your Flip-Ease for many years.
Assembling your new Flip-Ease is a 3 step
process, requiring no tools.
1. Insert foot into body of unit, making sure that
the notches are aligned correctly. Push down
until you hear a click.
2. Place the solution tube onto the spray connector.
3. Insert the handle into the body of the unit.
Turn handle until key in handle falls into
position and you hear a "click".
Charging the battery
1. When charging for the first time, allow to
charge uninterrupted for at least 12 hours.
NOTE: When charging, the Flip-Ease and
charger may become warm to the touch.
This is normal and no cause for concern.
2. Power switch must be in " O " (OFF) position
to charge.
3. When completely charged, the average
run time for dry vacuuming is 12 minutes.
When completely discharged, it will take
approximately 12 hours to fully recharge.
H
ow to use this guide
1
2
3
O
perations
A
ssembly
Tip:
For maximum battery life, completely
discharge and recharge Flip-Ease
every 1-2 months.
Tip:
After unit is charged (approximately
12 hours) unplug from outlet.
This will aid in prolonging the life of
the battery.
ug603-6913_5288E_1006.indd 5 ug603-6913_5288E_1006.indd 5 10/25/06 3:49:07 PM 10/25/06 3:49:07 PM