Bissell 5288 - Manual (Page 8)

16
w w w . b i s s e l l . c o m
M
aintenance and care (Continued)
Cleaning the MicroFiber pad
1. To wash the MicroFiber pad, simply toss in
the wash, air dry and reuse. No need to
buy disposable cloths every time you use
your Flip-Ease
Machine storage
1. Clean exterior surface of Flip-Ease with a
soft cloth dampened with water only. Do not
use a strong detergent or other cleaners as
this may damage the finish.
2. Store Flip-Ease in a protected dry area, at
room temperature (40° - 110°F).
Battery removal and disposal
Note: The battery must be removed from
the Flip-Ease before it is disposed of.
1. Important: Unplug charger.
2. Remove tanks (clean and dirty) and discard.
3. Remove screws (6) holding product housings
together (see diagram).
4. Use a screwdriver to score rating label on
side of unit.
5. Separate housings and locate battery pack
in bottom/center of unit.
Note: If the battery is leaking, do not
touch it. Contact your local authorities for a
safe disposal or recycling facility in your area.
6. Remove wire connectors from the battery
pack.
7. Keep battery packs together – DO NOT
separate individual batteries. For proper
battery disposal instructions, please contact
your local authorities for requirements and
regulations on safe disposal or recycling
facilities in your area.
8. Discard remainder of product.
3a
8
w w w . b i s s e l l . c o m
3b
WARNING:
This product contains a
rechargeable nickel
cadmium battery
(sometimes referred to
as a “Ni-Cad” battery)
pack. The average life of
a Ni-Cad battery is 5 to 7
years, depending on
frequency of use. Proper
removal and disposal of
Ni-Cad batteries is required.
Do not dispose of in
the municipal waste.
Ni-Cad
ug603-6913_5288E_1006.indd 8 ug603-6913_5288E_1006.indd 8 10/25/06 3:49:10 PM 10/25/06 3:49:10 PM