Fingerprint sensor expresscard – Toshiba Satellite A300D User Manual

Page 146

Advertising
background image

User’s Manual

9-16

Troubleshooting

Fingerprint sensor

ExpressCard

Refer also to Chapter 8,

Optional Devices

.

Problem

Procedure

Reading of the

fingerprint was not

successful

Please try again using the correct posture. Refer

to

Using the fingerprint sensor

in Chapter 4,

Operating Basics

.

Try the recognition process again using another

enrolled finger.

The fingerprint cannot

be read due to injuries

to the finger

Try the recognition process again using another

enrolled finger.
If fingerprints from all the enrolled fingers cannot

be read, please logon by using the keyboard to

input the password for the time being.
If problems persist, contact your dealer.

Fingerprint Pre-OS

feature or Single Sign

On feature cannot be

enabled

Please use TOSHIBA HW Setup to register the

User Password if it was not registered.

Fingerprint Pre-OS

feature does not work

Make sure you have enroll finger in windows

account.
Set the User Password by using TOSHIBA HW

Setup and restart the system.
Make sure place a checkmark in "Enable Pre-OS

Fingerprint Authentication" on the TrueSuite

Access Manager setting.

Problem

Procedure

ExpressCard error

occurs

Reset the ExpressCard to make sure it is firmly

connected.
Make sure the connection between the external

device and the card is firm.
Check the card’s documentation.
If problems persist, contact your dealer.

Advertising
This manual is related to the following products: