Modem warning notice, Working environment, Conformity statement – Toshiba Satellite A300D User Manual

Page 5

Advertising
background image

User’s Manual

v

A300D

Working environment

This product was designed to fulfil the EMC (Electromagnetic Compatibility)

requirements to be observed for so-called "Residential, commercial and

light industry environments".
TOSHIBA do not approve the use of this product in working environments

other than the above mentioned "Residential, commercial and light industry

environments".
For example, the following environments are not approved:

Industrial Environments (e.g. environments where a mains voltage of

380 V three-phase is used)

Medical Environments

Automotive Environments

Aircraft Environments

Any consequences resulting from the use of this product in working

environments that are not approved are not the responsibility of TOSHIBA.
The consequences of the use of this product in non-approved working

environments may be:

Interference with other devices or machines in the near surrounding

area.

Malfunction of, or data loss from, this product caused by disturbances

generated by other devices or machines in the near surrounding area.

Therefore TOSHIBA strongly recommend that the electromagnetic

compatibility of this product should be suitably tested in all non-approved

working environments before use. In the case of automobiles or aircraft, the

manufacturer or airline respectively should be asked for permission before

use of this product.
Furthermore, for general safety reasons, the use of this product in

environments with explosive atmospheres is not permitted.

Modem warning notice

Conformity Statement

The equipment has been approved to [Council Decision 98/482/EC - "TBR

21"] for pan-European single terminal connection to the Public Switched

Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in

different countries/regions the approval does not, of itself, give an

unconditional assurance of successful operation on every PSTN network

termination point.
In the event of problems, you should contact your equipment supplier in the

first instance.

Advertising
This manual is related to the following products: