How to delete the fingerprint data – Toshiba Satellite A300D User Manual

Page 74

Advertising
background image

4-6

User’s Manual

A300/A300D

7. In case of finger injury or authentication failure, it is recommended that

another fingerprint also be enrolled. The following message will be
displayed:

[We recommended enrolling at least two

fingerprint images.]

Click OK and repeat steps 3, 4, 5 and 6 with

another finger.

How to delete the fingerprint data

Saved fingerprint data is stored in the Non-volatile memory inside the
fingerprint sensor. If you hand over the PC to others, or dispose of it, the
following operations are recommended.

1. Click Start, point to All Programs, point to TrueSuite Access

Manager and click it.

2. The TrueSuite Access Manager Fingerprint Software screen is

displayed.

3. Enter your Windows Password and click Next to enter the Control

Center. Or swipe your enrolled finger to enter the Control Center.

4. The user’s fingers screen is displayed.

To delete all registered fingerprints:

1. Click Delete All Fingerprint

2. Follow the on-screen instructions to delete the registered

fingerprints

To delete individual fingerprints:

1. Click the fingerprint mark above the registered finger

2.

Are you sure you want to delete this
fingerprint?

will be displayed on screen, click Yes button.

3. When Delete All Fingerprints is selected, the user selection screen

will be displayed, so select which user’s fingerprint data to delete.

Selecting Delete current user’s fingerprints will delete the
fingerprint data for the currently logged in user.

Selecting Delete all users’ fingerprints will delete the fingerprint
data for all users, however this item can only be selected if the
currently logged in user has administrator privileges.

A message will be displayed asking for confirmation to delete the
fingerprint.

Advertising