Ant/cable/satellite (if available), Engl ish – Toshiba XL975 User Manual

Page 19

Advertising
background image

19

SETTING UP YOUR TV

Engl

ish

T

Select Next and press OK. The Satellite Settings
screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. For further
information, visit www.Toshiba-om.net.

Highlight Done and press OK.

u

If your satellite dish is movable, the following
Positioning screen will appear.

Press

B

or

b

to highlight Positioning, and then press

C

or

c

to find the dish position with the strongest

signal level.

Press

B

or

b

to highlight Store Position and press

OK to store the dish position. Repeat steps 20 and 21
for the next satellite as necessary.

If your satellite dish is not movable, the Positioning
screen will not appear.

Adjust the dish position manually for the maximum
Signal Level strength.

Highlight Done and press OK.

v

If the reception testing completes successfully, the
Auto Tuning startup screen will display.

You can select Search Option between Free to Air
and All.

w

Press

B

or

b

to highlight Start Scan, and then press

OK.

The television will start to search for available DVB-S
channels. The progress bar will indicate the scan
status.

When the search is complete, the Auto Tuning results
screen will display the total number of services found.

x

Use

B

or

b

to move through the list to select a

channel, and then press OK to view.

From this menu, you can set the RF input configuration.

a

Press MENU /

C

c

to highlight Setup icon.

b

Press

B

/

C c

to highlight System Setup icon and

press OK.

c

Press

b

to select Ant/Cable/Satellite and press

C

or

c

to select Antenna, Cable or Satellite.

NOTE: When you attempt to change the Ant/Cable/
Satellite
setting, a warning message will appear
followed by PIN entry (if PIN has been set) and a
prompt for Auto Tuning.

Satellite

No.

Dish

LNB

ASTRA 19.2˚E

Satellite Settings

1

4

3

2

1

1

Transponder: 1/85 (10729 MHz)
Dish Type: Fixed
Lower LOF: 9750
Upper LOF: 10600

Switch Type

None

LNB Power

On

Done

Positioning

Signal Level

30%

Go to Stored Position

Store Position

Transponder

1/83 (10743 MHz H)

Positioning

W

E

Go to 0

Satellite : ASTRA 19.2°E

Step Size

1

PLEASE NOTE

The Quick Setup menu can also be accessed at any
time from the Setup / System Setup menu.

Ant/Cable/Satellite (if available)

Auto Tuning - Satellite

Start Scan

Satellite

Free to Air

ASTRA 19.2°E

Search Option

Advertising