Toshiba XL975 - Manual (Page 39)

39
CONTROLS AND FEATURES
Engl
ish
When watching a DVD, the compression may cause some words
or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by smoothing out
the edges.
a
In the Advanced Picture Settings menu, press
B
or
b to select Noise Reduction and press OK.
b
Press
b
to select MPEG NR.
c
Press C or c to select High, Middle, Low or Off to suit
your preference.
DNR allows you to “soften” the screen representation of a weak
signal to reduce the noise effect.
a
Select DNR from the Noise Reduction menu.
b
Press
C
or
c
to select Low, Middle, High, Auto or Off.
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
This feature will reduce picture blur without decreasing image
brightness or adding flicker.
a
In the Advanced Picture Settings menu, press
B
or
b to select Active Vision.
b
Press
C
or
c
to select High, Middle, Standard or Off.
NOTE: When Picture Mode is set to Game, this feature will be
grayed out and automatically set to Off.
This feature allows you to reset the current Advanced Picture
Settings to the default values.
a
In the Advanced Picture Settings menu, press B or
b to select Reset.
b
Press OK.
When this television receives a true Widescreen picture and Auto
Format is On, it will automatically be displayed in Widescreen
format irrespective of the television’s previous setting.
a
Press MENU /
C c
to highlight Setup icon.
b
Press B / C c to highlight Preferences icon and
press OK.
c
Press B or b to select Display Settings and press OK.
d
Press B or b to select Auto Format and press C or c
to select On or Off.
When 4:3 Stretch is activated, the size switching system
changes 4:3 programmes into full screen picture.
a
In the Preferences menu, press B or b to select
Display Settings and press OK.
b
Press B or b to select 4:3 Stretch and press C or c to
select On or Off.
When Blue Screen is selected, the screen will turn blue and the
sound will be muted on analogue channels and external input
modes when no signal is received.
NOTE: Some external input sounds may not be muted.
a
In the Preferences menu, press B or b to select Blue
Screen.
b
Press C or c to select On or Off.
MPEG NR – Noise Reduction
DNR – Digital Noise Reduction
Active Vision
Resetting the advanced picture settings
Noise Reduction
DNR
MPEG NR Low
Auto
Automatic Format (Widescreen)
4:3 Stretch
Blue Screen
Auto Format On
4:3 Stretch Off
Picture Position
PC Settings
Display Settings